Katool KT-X99 Full Rise Scissor Lift 7,700 lbs Capacity
KATOOL Professional Vehicle Lifts
Hydraulic full-rise lifting with an open center for professional under-vehicle service.
The KATOOL KT-X99 is a full-rise hydraulic scissor lift with a supplier-listed 7,700 lb lifting capacity. Its two-platform design lifts compatible passenger cars, SUVs, and light trucks while leaving an open center for access to many under-vehicle components. The supplier lists a maximum lifting height of 76 inches, giving technicians a standing-height work position in a suitable service bay.
Designed for repair shops, tire service centers, and equipped garages, the KT-X99 supports inspection and maintenance work such as brake, suspension, exhaust, and general undercarriage service. Always position the vehicle according to the lift's approved lifting points and operating instructions.
| Model | KT-X99 |
|---|---|
| Lift type | Full-rise hydraulic scissor lift |
| Rated capacity | 7,700 lb |
| Maximum lifting height | 76 in |
| Lowered height | 4.5 in, as listed |
| Overall length | 78 in, as listed |
| Overall width | 52 in, as listed |
| Platform width | 48 in, as listed; confirm measurement reference |
| Approximate lift time | 30–40 seconds, according to supplier |
| Motor | 2.0 HP, as listed |
| Electrical options | Supplier lists 110 V / 220 V electric-hydraulic options; confirm the voltage and phase of the unit supplied |
| Safety locks | Multi-position mechanical system, per supplier |
| Approximate shipping weight | 1,250 lb, as listed |
| Package dimensions | 84 × 56 × 28 in, as listed |
Before ordering: Verify ceiling height, vehicle fit, weight distribution, electrical configuration, floor and installation requirements, and included accessories against the current KT-X99 manual. The supplier's metric conversions for capacity and maximum height conflict with its stated pound and inch figures, so the table above uses the latter.
