Katool KT-M110 11,000lbs Two Post Lift
KATOOL Professional Vehicle Lifts
Symmetric lifting arms and an open floor for professional vehicle service.
The KATOOL KT-M110 is an 11,000 lb capacity, clear-floor two-post vehicle lift designed for automotive repair shops and equipped garages. Its symmetric arm layout and overhead crossbar leave the space between the columns open, giving technicians access around the vehicle for brake, wheel, suspension, drivetrain, and undercarriage service.
Dual hydraulic chain-drive cylinders power the lifting system. The supplier also lists manual safety release on both columns, an overhead shutoff bar, rubber door-protection pads, and extension support adapters. The standard power configuration is listed as 220 V / 60 Hz / single phase.
| Model | KT-M110 |
|---|---|
| Lift type | Symmetric, clear-floor, two-post lift |
| Rated lifting capacity | 11,000 lb (5,000 kg) |
| Maximum lifting height | 70.75 in (1,800 mm) |
| Minimum lift-pad height | 4.25 in (110 mm) |
| Overall height | 141.25 in (3,587 mm) |
| Overall width | 142.25 in (3,614 mm) |
| Inside column width | 110.25 in (2,800 mm) |
| Outside column width | 128 in (3,250 mm) |
| Drive-through clearance | 94.5 in (2,400 mm) |
| Front/rear arm reach | 30.75–50.5 in, two-stage arms |
| Standard electrical supply | 220 V / 60 Hz / single phase; 2.2 kW motor |
| Other supplier-listed option | 110 V / 60 Hz / single phase; availability and configuration must be confirmed |
| Net weight | Approximately 1,367 lb (620 kg) |
Compare the lift's overall height and width with the intended bay, including overhead obstructions and the vehicle's height when raised. Check drive-through clearance, arm reach, vehicle pickup points, and the load on each arm. The overall 11,000 lb rating does not replace the individual-arm limits or the manufacturer's instructions for vehicle positioning.
Have a qualified installer confirm concrete condition, slab thickness, anchor requirements, electrical service, and local installation requirements against the current KT-M110 manual. Verify the actual voltage of the unit ordered before arranging electrical work.
Supplier dimensions and included accessories may vary by configuration. Confirm current specifications, included adapters, and power-unit voltage before ordering.