Katool KT-4H150 15,000 lb Heavy-Duty 4-Post Alignment Lift with Rolling Jack
KATOOL Heavy-Duty Alignment Equipment
High-capacity service lift with a supplier-listed 6,000 lb rolling jack included.
The KATOOL KT-4H150 is a 15,000 lb capacity four-post alignment lift for shops servicing compatible trucks, vans, SUVs, and other commercial vehicles. Drive-on runways support the vehicle during inspection, maintenance, and alignment-related work. The supplier lists one 6,000 lb rolling jack with the lift to raise a supported axle for wheel-free service when used according to both products' instructions.
Its four-post structure, diamond-plate runways, and hydraulic power system suit demanding service bays. The supplier describes mechanical safety locks on all four posts, a single-point manual lock release, and flexibility to position the power-side column at the front or rear on either side, subject to the installation manual.
Alignment measurements require suitable alignment equipment and any applicable accessories. The supplier identifies turntables as optional rather than included.
| Model | KT-4H150 |
|---|---|
| Lift type | Four-post alignment / service lift |
| Lift rated capacity | 15,000 lb (approximately 6,803 kg) |
| Included rolling jack capacity | 6,000 lb (approximately 2,721 kg) |
| Maximum lifting height | Approximately 76 in |
| Post height | Approximately 92 in; confirm exact dimension |
| Overall width | Approximately 136.06 in |
| Overall length with ramps | Approximately 245.31 in |
| Width between columns | Approximately 118.11 in |
| Minimum runway height | Approximately 9.3 in |
| Lifting time | Approximately 60 seconds up |
| Lowering time | Approximately 55 seconds down |
| Standard power | 3 kW; 220 V / 60 Hz / single phase |
| Supplier-listed option | 110 V power; confirm availability and configuration |
| Net weight | Approximately 4,850 lb |
| Alignment turntables | Optional; sold separately according to supplier |
Check the bay's overall length and width, approach space, vehicle wheelbase, runway fit, ceiling height, and raised-vehicle clearance. Have a qualified installer assess the concrete, anchoring, electrical circuit, and any requirements for the included rolling jack against the current manufacturer manuals. Lower the lift onto its mechanical locks as directed before working beneath a vehicle.
The supplier lists the post height as approximately 92 in but pairs it with an inconsistent metric measurement. Confirm that dimension, the exact rolling-jack package, power configuration, and current installation requirements before ordering.