Katool KT-M120 12,000 lbs Two Post Lift
KATOOL AUTOMOTIVE LIFT EQUIPMENT
A clear-floor lift with symmetric arms and wide under-vehicle access for service bays handling qualifying cars, SUVs, vans and trucks.
The KATOOL KT-M120 combines a 12,000 lb rated capacity with a clear-floor layout that leaves the space between columns open for technicians and shop equipment. Symmetric two-stage arms help position the vehicle over the lift, while a listed maximum lifting height of approximately 70.75 inches gives access to the undercarriage for maintenance and repair.
| Specification | Supplier listing |
|---|---|
| Model | KT-M120 |
| Rated lifting capacity | 12,000 lb |
| Configuration | Clear-floor, two post lift with symmetric arms |
| Maximum lifting height | Approximately 70.75 in (1,800 mm) |
| Minimum pad height | Approximately 4.25 in |
| Overall height | Approximately 166.75 in |
| Overall width | Approximately 165.5 in |
| Inside column width | Approximately 130 in (supplier listing) |
| Drive-through clearance | Approximately 117.75 in |
| Arm reach | Approximately 31–51 in; two-stage arms |
| Listed power | 220 V / 60 Hz / single phase; 110 V option noted by supplier |
| Net weight | Approximately 1,500 lb (680 kg) |
Confirm ceiling height, concrete and anchoring requirements, vehicle fit, pickup points, per-arm ratings, power-unit voltage and included accessories before ordering or installing. The supplier lists 220 V single phase and notes a 110 V option; verify the specific unit being supplied. Some inch and millimeter values in the original listing differ slightly, so measurements above follow its inch values.
The supplier lists +30 mm and +120 mm support adapters and rubber vehicle-contact protection. Confirm the quantities and sizes delivered with your KT-M120.
The KATOOL KT-M120 provides 12,000 lb two post lifting capacity with clear-floor access for professional vehicle service.
