Katool KT-B750 Wheel Balancer
KATOOL WHEEL SERVICE EQUIPMENT
A shop wheel balancer with automatic distance and diameter input, multiple balancing modes and a 7-second measuring cycle.
The KATOOL KT-B750 helps tire shops and service bays balance wheels with a fast, straightforward workflow. Its automatic measurement ruler enters A and D values, while multiple modes accommodate different wheel and rim setups. The supplier lists ±1 g balancing accuracy, a 180 rpm balancing speed and a seven-second measurement time.
| Specification | Published value |
|---|---|
| Model | KT-B750 |
| Rim diameter | Less than 24 in |
| Wheel width | 15 in (supplier listing) |
| Maximum wheel diameter | Less than 880 mm (approximately 34.6 in) |
| Maximum wheel weight | Less than 65 kg (approximately 143 lb) |
| Balancing speed | 180 rpm |
| Balancing accuracy | ±1 g |
| Measuring time | 7 seconds |
| Power supply | 110 V, single phase |
| Motor power | 0.25 kW |
| Rim center hole diameter | Less than 135 mm |
| Included cone ranges, largest to smallest | 5 7/16–3 11/16 in; 4 1/8–2 3/4 in; 3 1/8–2 1/8 in; 2 3/8–1 5/8 in |
The supplier lists wheel width as “15 in” without a stated range. Confirm wheel fit and the components included with your unit before ordering.
The supplier gallery also shows a ruler extension adapter. Its inclusion is not specified in the product description; confirm whether it is supplied with your KT-B750 configuration.
The KT-B750 combines automatic measurement input and a seven-second cycle for professional tire service.
