Gedore Electronic Torque Wrench; E-torc2; Type SE; 14x18, 30-300 Nm

Features and Benefits:

• "Features
• Professional Digital Torque Wrench
• 30 - 300 Nm
• 1/2"" drive
• reads torque and rotary angle
• ships in heavy duty steel case with foam insert Optical, acoustic and sensory signalling when reaching the set bolting parameter/with additionalvisualisation of screw tightening by means of LED progress bar. Software-enabling graphics evaluation. Marked contrast graphics display with backdrop lighting For hard-to-access places and given not enough room. Special tools on request. The aluminium housing and ergonomic handle ensure easy, safe handling - even with largetightening torques. Tool holding fixture availableFunction keys: Easy to use Key pressure taring Side ergonomic operating key Convertible from Nm to lbfft via software"



Drive connector rectangular: 14 x 18 mm, Drive connector square (male): 1/2", Drive connector square (male): 12,5 mm, Drive type/drive: Rectangular cavity, Evaluation software: yes, Measurement accuracy: 1% Toleranz vom Ablesewert, 1 Digit, Measuring accuracy angle of rotation: 1% , min. 1° auf 360° bei mind. 4°/sec., Net weight [kg]: 1,84 kg, Precision +/-: +/- 1 %, Range of application: AssemblySeries assemblyProductionQuality controlMaintenance and repairBolting case analysis, Target groups: AutomotiveElectronics industryIndustryConstruction and commercial vehiclesMilitaryEnergyMechanical engineeringServiceRailway, Tightening direction: Left and right, Torque (max.) [lbfft]: 221 lbfft, Torque (max.) [Nm]: 300 Nm, Torque (min.) [lbfft]: 22 lbfft, Torque (min.) [Nm]: 30 Nm, Torque range (min./max.) [lbfft]: 22 lbfft - 221 lbfft, Torque range (min./max.) [Nm]: 30 Nm - 300 Nm; Tightening check for torque/rotary angle Optical, acoustic and sensory signalling on reaching the set bolting parameter/with additional visualisation of screw tightening by means of LED progress bar Software-enabling graphics evaluation Marked contrast graphics display with backdrop lighting Drive: Spigot end 22/28 mm, 1/4" square drive or 9x12/14x18 mm rectangular cavity with pin-locking mechanism. The installation size determines the drive No. ET2SKA 150 and No. ET2SKA 300 incl. 1/2" reversible ratchet For use in barely accessible places Special tools on request Lightweight and robust: The aluminium housing and ergonomic handle ensure easy, safe handling - even with large tightening torques Tool holding fixture, as from ET2SKA 150 120° rotatable to the aluminium housing Function keys: Easy to use Calibration at the push of a button Side ergonomic operating key Convertible from Nm to lbfft via software Use: Mini-batch assembly Quality assurance Test labs and testing departments Alternate-Tool for assembly workstations Corrective work places Inspection and analysis of bolted connections Features: Large field of operation: 5 models in the range from 2 to 1000 Nm Tool holding fixture 1/4" square, 9x12, 14x18 rectangular cavity with pin-locking mechanism, 22 and 28 mm spigot end (model dependent) Signalling: visual (LED progress bar), acoustic (beep), sensory (vibration) Traceable to national standards Torque reading precision +/- 1 %, +/- 1 digit from reading figure