Gedore Torque Multiplier DREMOPLUS ALU 4000 Nm

Features and Benefits:

• Features: Max torque: 4000 Nm
• input drive: 1/2"
• 1" output drive
• Mechanical hand torque multiplier for controlled screwtightening and unloosening screw connections With a two-stage planet gear High-performance aluminium housing Torque multiplication ratio: 1:18, 1:22, 1:28.5, 1:39 All models with anti-wind-up ratchet (RS) With non-destructive "Slipper" overload safety mechanismfor gear protection - clockwise and anticlockwise Z-form, offset reaction arm depending on model made of chrome-vanadium steel Can be optionally retrofitted with L-form straight reaction arm- with adjustable reaction arm - of lightweight metal Guaranteed accuracy: Better than +/- 3 % tolerance For operation in combination with a torque wrench 4 models for maximum load in the range between max. 6000 Nm and max. 13000 Nm Output square with drill hole for impact sockets with safety pin and ringScope of delivery: Torque Multiplier DREMOPLUS ALU With Z-form offset reaction arm Delivery in sturdy shipping case with foam insert Factory test certificate and setting table Detailed technical information is available on request



Backflow protection: yes, Distance output square - end of reaction arm (max): 133, Distance output square - start reaction arm (min.): 68, Drive connector square (male): 1/2", Drive connector square female (metric): 12,5 mm, Drive connector square female [inch]: 1/2", Eingangskraft [Nm]: 310 Nm, Input force [lbfft]: 230 lbfft, Multiplication at the ratio: 1:16, Net weight [kg]: 4,2 kg, Output square: 1", Output square (inch): 1", Output square (metric): 25 mm, Output torque (max.) [lbf-ft]: 2390, Output torque (max.) [N-m]: 4000, Parts list: Torque multiplier DREMOPLUS ALU Delivery in stable box Adjustment table Detailed technical information is available on request, Total height with reaction arm (max.): 270, Total height with reaction arm (min.): 264, Total height without reaction arm: 227, Total width without reaction arm: 88, Version reaction arm: Z-Form, cranked; Especially suitable for: Machinery and plant engineering Cable cars, lifts and masts Heavy industry, construction sites Bridge construction Shipbuilding, aircraft and railway construction Refineries, plastics industry Power plants of all kinds Features: Mechanical hand torque multiplier for controlled screw tightening and unloosening screw connections With a two-stage planet gear High-performance aluminium housing Models with 1:16 gear ratio DVV-40ZRS model with anti-wind-up ratchet (RS) With non-destructive overload protection "Slipper" to protect the gearbox, right and left hand Z-form, offset reaction arm depending on model made of chrome-vanadium steel Guaranteed accuracy: Better than +/- 3 % tolerance To operate with a suitable torque wrench 2 models with maximum load in the range of max. 4000 N-m Output square with hole for Impact sockets with locking pin and ring