You are here:Home >
Atlas Automotive Equipment - ATEXH-TPF-9-FPD

Atlas XH-TPF-9

Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 1 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 2 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 3 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 1 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 2 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 3 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 4 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 1 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 2 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 3 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 4 of 0
Atlas Automotive Equipment - ATEXH-TPF-9-FPD - Image 5 of 0

Atlas Equipment 9,000 lb. Capacity Baseplate 2-Post Lift

Atlas Automotive Equipment
List Price: $3,149.00
$
You save $!

WARNING: cancer and reproductive harm - www.P65Warnings.ca.gov
Choose your options:
Unloading Equipment
Unloading Equipment(required):
Product Code: ATEXH-TPF-9-FPD

Atlas Equipment 9,000 lb. Capacity Baseplate 2-Post Lift

The light duty Atlas® TPF-9 lift is an economically designed baseplate 2-post lift. The reliable chain-drive cylinders and dual safety system make this the perfect choice for “Mr. Homeowner” or small commercial shops looking to service cars, SUV's and light duty trucks. The TPF-9 has an overall height under 9 feet 4 inches. The Atlas® TPF-9 has symmetric columns and symmetric arms. The low pad height will allow the operator to position the lift arms under most small cars (with low pick-up points) and heavier pickup trucks. The Atlas® TPF-9 two post “chain over roller” lifts have a spring-loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.
  • 9,000 lb. Capacity
  • Baseplate, Open Top design
  • Overall Height: 111 1/2? (9? 3 1/2")
  • Symmetric Arms
  • Automatic Arm Restraints
  • Dual-Point Lock Release
  • Rubber Guards on Carriages
  • Dual Hydraulic Chain-Drive Cylinders
  • Secondary Lock System
  • Adjustable Screw-Up Adapters Included
  • Free 4 Piece Truck Adapter Set
  • Free set of Sliding Arm Adapters
  • Mounting Hardware Included
  • Shipping Weight: 1,400 lbs.
  • 2 yr Structural ‐ 1 yr Hydraulic Warranty ‐ Parts Only

Atlas XH-TPF-9

Capacity 9,000 LB.
Overall Height 111 1/2" (9' 3 1/2")
Overall Floor Width 133 1/2" (11' 1 1/2")
Maximum Lift Height (Without Adapters) 76 1/2"
Maximum Lift Height (With Adapters) 79 1/2"
Minimum Arm Height 4"
Inside Column 111 3/8" (9' 2 3/8")
Drive Thru 98 1/2" (8' 2 1/2")
Column Size 7 1/4" x 11"
Column Thickness of Steel 5mm
Base Of Lift 14 1/4" x 18"
Motor/Electrical Requirement 220 volt single (1) phase. (A 30 amp breaker is recommended)
Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED)
Shipping Weight 1,400 LBS.
Adapter Heights 4 Each 2.75"
Arm Hole/Adapter Peg Size 2"
Requires concrete a minimum of 4" with a 3000 psi. rating

Reviews

Average Customer Review:
( 0 )
Empty Cart