Katool KT-CR2 4H110 Caster Kit
KATOOL FOUR POST LIFT ACCESSORIES
A four-caster mobility kit made to reposition the KT-4H110 four post lift within a suitable garage or shop.
Need to change the position of your lift as your garage layout changes? The KATOOL KT-CR2 is designed for the KT-4H110 four post lift. Four steel caster frames with wheels give you a way to move the unloaded lift across a suitable, level shop floor, then return the lift to its normal operating position.
| Item | Supplier listing |
|---|---|
| Model | KT-CR2 |
| Compatible lift | KATOOL KT-4H110 four post lift |
| Kit quantity | Four caster assemblies shown |
| Capacity per caster | 0.5 ton, as listed by supplier |
| Combined caster rating | 2 tons / 4,000 lb, as listed by supplier |
| Construction | Steel support frames with casters |
Moving the lift: Remove the vehicle and loose equipment before using the casters. Verify the lift's unloaded weight is within the caster kit's rating, follow the lift manufacturer's installation and movement instructions, and use the lift only in its prescribed operating position. Confirm the supplied hardware and fitment with your KT-4H110 before ordering.
Use the KT-CR2 caster kit to reposition the unloaded four post lift as your workspace needs change.
