30 Amp Plasma Cutter w/ Attached Torc

Features & Benefits:

• Cuts mild steel, stainless, brass, aluminum and other conductive materials
• Lightweight and portable
• Powerful and reliable IGBT inverter technology delivers 30 Amp at a 35% duty cycle
• Dual voltage-sensing technology (115V or 230V) lets you plug into any common power supply with included adapter
• Rated 1/4" (6.4mm) clean cut on mild steel with 1/2" (12.7) rough sever
• Low frequency, pilot arc system for instant starts and ease of use when cutting rusty material and will not interfere with other electrical systems including telephone or computer
• Self-resetting thermal overload protection with indicator light automatically shuts off to avoid overheating
• Adjustable air filter/pressure regulator
• Fan cooled
• Power supply/phases (v-ph): 115/230v - 1 +/- 15%
• Rated input power: (kva): 5.5-230v
• Rated output current: 20-30a
• Duty cycle at 104 degrees f: 35% at 30a - 230v
• Efficiency: 85%
• Open circuit voltage: 96v
• Cutting capacity: rated 1/4" (6.4mm) clean cut on mild steel with 1/2" (12.7mm) rough sever
• Rated: 1/4" (6.4mm)
• Sever: 1/2" (12.7mm)
• Air supply: clean, dry, oil-free compressed air
• Recommended input pressure/flow: 6.0 scfm at 75 psi
• Compliant to: can/csa e60974-1
• Includes: 12 ft. (3.7 m) trf45 plasma torch (direct connect) 10 ft. ( 3 m) work cable with clamp 115v/230v power adapter consumables: 1 electrode and 1 cutting nozzle