Home > Auto Lifts > Two Post Lifts >

Stratus 2 Post, Clear Floor, 10,000 lbs, Asymmetric/Symmetric 2-in-1 Design, Direct Drive

Stratus Clear Floor 10K 2 Post Auto Lift
Stratus SAE-C10C


 
Alternative Views:


Your Price: $4,049.00



Product Code: SAE-C10C
Qty:

Description
 

Stratus SAE-C10C

Important Note

  • $200 surcharge applied to shipping to OR, WA, ID, MT, ND, SD.
  • This item is shipped by freight ONLY to a Commercial Address where there are no residential dwellings or Truck Terminal or A Local Installer within the lower 48 state, the buyer is always responsible for unloading the product from the truck, and a forklift or something similar is required for unloading.
  • This item can also be picked up at our warehouse, we offer $380 in-store pickup discount, and we have a forklift to help you to load.

Features

  • Symmetric & Asymmetric 2 installation methods
  • Clear floor overhead single (1) point manual release
  • 10,000 lbs lifting capacity
  • Direct Drive
  • 4 Screw-up rubber pads & 8 truck adapters included. Truck adapter size: One of each 1.6"(40mm) & 2 3/4"(70mm)
  • 2 of 2-stage arms & 2 of 3-stage arms
  • Top limiter switch
  • CE Certified
  • Proofed by dynamic test with 115% of rated capacity and static test with 150% rated capacity
  • Powder coating finish: Granite Grey (RAL 7026) + Reinorange (RAL 2004)

Warranty

  • 5 years lifting structure & 2 years hydraulic cylinder & 2 years power unit
  • Note: **Parts only and labor costs for someone to install the replacement part are NOT covered. The hydraulic cylinders come with a 30 days full warranty and after 30 days we will provide a seal kit**

Technical Specification

  • Lifting Capacity: 10,000 lbs
  • Overall Height: 152 5/8"
  • Width Inside Column(Symmetric): 118 3/16"
  • Width Inside Coulum(Asymmetric): 110 5/8"
  • Max Lifting Height: 78" with truck adaptor, 74 13/16" without truck adaptor
  • Min Height: 3 15/16"
  • Drive Through(Symmetric): 106"
  • Drive Through(Asymmetric): 101"
  • Lifting Time: About 50 Sec.
  • Lowering Time: About 40 Sec.
  • Motor Power: 3 HP
  • Motor Voltage: 220 V (Recommend 30A Breaker)
  • Rated Frequency: 60 HZ
  • Phase: 1 PH
  • Hydraulic Oil: Recommend AW46/AW32
  • Column Thickness of Steel: 5.5 mm
  • Carriage Thickness of Steel: 5.5 mm
  • Arms Thickness of Steel: 6 mm
  • Cable Diameter: 0.354"
  • Shipping Weight: 1440 lbs
  • Shipping Size: 113 "L * 29"W * 32"H

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Auto Lifts > Two Post Lifts
Auto Lifts > Two Post Lifts > 10,000 lbs Capacity 2 Post Lifts