Home > Auto Lifts > Alignment Lifts >

HDS-14LSX 14,000-lb. Alignment Lift Combo With Rolling Jacks and Airline Kit


HDS-14LSX Alignment Rack Combo
HDS-LSX Alignment Lit Combo


 
Alternative Views:


List Price: $9,355.00
Your Price: $7,825.00
We will match, or beat any lower advertise price on the web call us at 888-998-8665
You save $1,530.00!


Product Code: HDS-14LSXCOMBO
Qty:

Description Technical Specs
 

HDS-14LSX

The BendPak alignment racks are the most used, and sought after alignment lifts it's great for doing wheel alignments. This combination comes with alignment rack 2 rolling jacks and airline kit. This rack works with all top name brand wheel aligners.

BendPak's HDS-Series alignment lifts are engineered to meet the strenuous demands of even your toughest professional lifting jobs. Designed into every HDS-Series lift is a laundry list of key features that improve safety, durability and productivity, ensuring that BendPak is the absolute best you can buy.

The HDS-14LSX is the sturdy beast you want as the backbone of your shop; especially if you specialize in servicing larger, low ground clearance vehicles. Our alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with no resistance or hassle.

We call it "free floating." You'll call it unbelievably easy.

The HDS-14LSX features aircraft-quality stainless steel and aluminum pneumatic cylinders that release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously when raising the lift. For added safety, a second lock system acts as an automatic slack-cable device, automatically engaging in the event of an unexpected cable failure. Lifting cables, airlines, safety latches and sheaves are all fully enclosed within the lift structure.

Love the extended lifting and aligning power of the HDS-14LSX, but need something a little different? Check out the super-long HDS-14LSXE.

Dual-hub cable sheaves
Huge 10-1/2" diameter cable sheaves within the runway and cross tubes combined with massive 2-1/4" diameter sheave axles dramatically improve cable wear and critical component lifespan meaning you'll spend less money in service related expenses down the road. Dual-hub cable sheaves reduce stress, fatigue and wear.
Sheeves.jpg
Heavy-duty aircraft cable

BendPak's HDS-Series lifts feature four 1/2" diameter 6 x 25 stainless-steel lifting cables that have a breaking strength of over 14,000 pounds each. This aircraft-quality cable was specifically designed for lifting applications and provides a great balance between abrasion resistance and fatigue.

Under-runway.jpg
Adjustable height locking positions
Each column features multiple adjustable height locking positions for variable-height parking and infinite leveling. 12" x 10" base plates provide a solid foundation.

ladder.jpg
Built-in lubrication

Grease fittings are located on every sheave and sheave axle to help keep these critical parts well lubricated and to simplify periodic maintenance.

warning-side.jpg

Slip plates
Multi-caster slip plates in the back and turn plates in the front allow for extremely precise, free-floating alignment.

slip-plate.jpg

Turn plate
Dual recessed turn plate pockets allow you to position the corrosion resistant galvanized turn plates in the location best suited for individual vehicle positioning - provides for more clearances related to allowable equipment installations.

turn-plates.jpg
Hidden hydraulic cylinder
Leak proof cylinder technology only available for BendPak four-post lifts
Each HDS-Series four-post is equipped with a single 3-1/2" diameter hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. The welded cylinder body is made from high strength steel tubing produced to exceed ASTM specifications.
cylinder.jpg
The hydraulic cylinder features a one-piece, pilot fitted, machined steel piston wrapped with high-durometer, mechanically loaded rod seals, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001½ diametrically, to ensure superior cylinder operation and life.. This combination of superb base material and superior processing ensures straight, smooth, cylinders that will provide years and years of dependable trouble-free service. hydraulic-cylinder-design.jpg
Flow restrictor
An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
Integrated-hydraulic-flow-restrictor.jpg
Durable powder coat
A durable powder coat finish can withstand harsh environments and chemical sually inspected then sandblasted. (2) All parts are washed in five-stage phosphate tanks then immediately dried, to avoid rusting. (3) All surfaces and/or threaded holes that need to be masked or plugged are done so with high-temperature masking tape and silicone plugs. (4) The parts are given a quick thinner wipe to remove any light debris or fingerprints. (5) Finished parts are hung on an electro-statically grounded conveyor line, then powder is applied using an electrostatic spray gun. (6) Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400 degrees for 15 for 45 minutes.
factory-coat.jpg
Spring-loaded safety locks
Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
drawing.jpg
Push-button pneumatic lock release
A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.
valve.jpg
Secondary lock system
A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.
srping-loaded-slack-cable.jpg
Integrated design
Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure.

under-runway-2.jpg
Electric hydraulic power system
A maintenance-free electric hydraulic power system assures ultimate dependability. All operator controls are conveniently located within easy reach.
power-supply.jpg
Non-skid runways

Non-skid runways provides maximum grip, even when the runway surface is wet or oily. Extended length approach ramps feature automatic rear wheel chocks and help when loading low ground clearance vehicles.

Longer approach ramps

These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It's the little bit that makes a big difference.

ramp.jpg
Flexible protective conduit
Hydraulic hoses and airlines are routed through a flexible protective conduit.
ramp-hose.jpg
Rolling bridge jacks
Optional 7,000-pound capacity rolling jacks (model RJ-7) make a great addition to increase service capacity. RJ-7 bridge jacks are used to raise the front or rear portion of a vehicle off the runways allowing operators to perform efficient wheel and brake service. A pair of jacks allows the entire vehicle to elevated. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Telescoping rail supports accommodate adjustable runways for different tread widths. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.
hds-bridge-jack.jpg

RJ-7 Rolling JacksBendPak RJ-45

This optional scissor-style rolling bridge jack offers peerless jacking speed and convenience. The RJ-7 provides you with the ability and added versatility to raise 2 or 4 wheels off the runways, making automotive service such as brake jobs and suspension work a cinch. Their exclusive telescoping roller design allows the runways to be adjusted for different tread widths, so you don’t need an adapter to work on a variety of vehicles. Reaching the factory approved jacking points has never been easier—the precision rollers enable you to position the RJ-7 anywhere beneath the vehicle.

BendPak rolling jacks for four-post car lifts are designed to be there when you need them and gone when you don’t. Just remove your RJ-7 out of the way when you need the space. Each jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed. Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.

AK-14 Integrated Rolling Bridge Airline KitBendPak Airline Kit

Rolling bridge jacks are great for extending the functionality of your BendPak four-post lift, and they're about to get a whole lot better. Install this helpful kit and elegantly hide the airlines beneath your lift's own runways. One kit provides air infrastructure for two jacks.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Auto Lifts > Alignment Lifts
BendPak
Auto Lifts > Alignment Lift Combos
Auto Lifts