 |
 |
 |
|
BendPak Boat Storage Lift HD-7500 SERIES
HD-7500PBX SKU#5175320
Four-Post Boat Lifts
7,500-lb. Capacity / Vehicle and Boat Storage Lift
THE PERFECT BOAT STORAGE LIFT
Never trust your precious boat to the unpredictability of the water, nor should you pay for dry docks and/or yard storage.
Salt water corrosion, barnacles, rust damage, rub marks,
coating blemishes, rot and cold weather can do irreversible
harm caused to your boat’s engine and interior. The longer you
go without a boat storage lift, the more you leave yourself open
to catastrophe.
BendPak has the perfect solution: Keep your boat up in the air
and out of the water. Because it features adjustable runways
that accommodate cars and trucks, the HD-7500 Series pulls
double-duty as a professional-grade car lift for vehicles.
NO MORE DOCKING FEES
A boat lift is a great way to shield yourself from monthly
boata storage fees. The larger the boat, the bigger the bill, so
there’s no better way to keep your boat safe than to store it in
your own garage.
FITS MOST BOAT TRAILERS
Wide and narrow installations help accommodate virtually all boat
trailer types.
- 7,500-lb. lifting capacity
- Two different lifting heights to choose from
- Electric / hydraulic power system
- Internal anti-sway slider blocks in each column
- Both models feature heavy-duty 3/8 in. aircraft cable
- Multi-position safety locks in each column
- Ramps feature non-skid surface
- Runways include rail-kit for optional accessories
- Single hydraulic cylinder underneath runway
- Over-sized self-lubricating cable rollers
- Rugged 1-1/4 in. roller axles
- Adjustable lock ladders
- Push-button pneumatic safety release
- Durable powder coat finish
 |
 |
 |
 |
Note: An air supply (minimum 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply. Not all BendPak lift models meet the standards as prescribed by ANSI/
ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact
BendPak via [email protected]
| |
HD-7500BLX |
HD-75BXT |
HD-7500PBX |
| |
|
Extended Length Model |
Extended Height Model |
| |
 |
 |
 |
| |
| Lifting Capacity |
7,500 lbs / 3,402 kg |
| Maximum Capacity Front Axle |
3,750 lbs. / 1,701 kg |
| Maximum Capacity Rear Axle |
3,750 lbs. / 1,701 kg |
| Min. Runway Height, Lowered |
5 in. / 125 mm |
| Maximum Rise |
82 in. / 2,058 mm |
82 in. / 2,058 mm |
144.5 in. / 3681 mm |
| Maximum Lifting Height |
87 in. / 2,208 mm |
87 in. / 2,208 mm |
132 in. / 3357 mm |
| Overall Width |
132 in. / 3,353 mm |
| (with fasteners 133.75 in. / 3,398 mm) |
| Outside Length |
198 in. / 5,028 mm |
222 in. / 5638 mm |
198 in. / 5,028 mm |
| Overall Length |
224.5 in. / 5,704 mm |
248.5 in. / 6313 mm |
224.5 in. / 5,704 mm |
| Height Of Post |
100 in. / 2,537 mm |
100 in. / 2,537 mm |
157.5 in. / 4010 mm |
| Distance Between Posts |
122 in. / 3,103 mm |
| Drive-Through Clearance |
108.5 in. / 2,756 mm |
| Runway Width |
19 in. / 482 mm |
| Runway Length |
188.5 in. / 4,788 mm |
212.5 in. / 5398 mm |
188.5 in. / 4,788 mm |
| Width Between Runways |
49.5 – 69.5 in. / |
46.5 – 66.5 in. / |
49.5 in. – 69.5 in. / |
| 1,257 mm – 1,765 mm |
1,181mm –1689 mm |
1,257 mm – 1,765 mm |
| Outside Edge Of Runways |
87.5 in. (narrow) or 107.5 in. (wide) / 2,223 mm or 2,731 mm |
| Locking Positions |
17 spaced every 4 in. / 102 mm |
17 spaced every 4 in. / 102 mm |
30 spaced every 4 in. / 102 mm |
| Motor |
208-230 VAC, 60 Hz, 1 Ph |
| Air Supply |
3 to 25 CFM at 50 to 150 psi |
|
|
|
 |
|
 |
|
