Authorized Dealer

Description

This complete motorcycle adapter kit is designed to increase the clamping capability of all Ranger rim clamp tire changers. The motorcycle adapter kit is installed over the existing turntable clamping jaws and increases the external clamping range of the turntable jaws. The raised height of the motorcycle adapter kit allows motorcycle and ATV wheels to be elevated above the solid rim clamp turntable. This raised position allows many rear wheels to be clamped effectively (for the purpose of mounting or demounting a tire) eliminating the need to remove sprockets or hubs.

Shipping Details

It is the buyer's responsibility to unload the freight at their location. BendPak will take no responsibility for additional charges of any kind that may incur related to, or involved with, the renting or acquisition of equipment of any kind necessary to unload items off of a delivering carrier's truck. Contact your BendPak dealer for shipping details.

PRODUCT WARRANTY

Ranger Spray Wash Cabinets are warranted for five years
on cabinet enclosure; one years on all operating components to the original purchaser, to be free of defects in
material and workmanship. Ranger Products shall repair or replace at their option for this period those parts
returned to the factory freight prepaid which prove upon inspection to be defective. Ranger Products will pay
labor costs for the first 12 months only on parts returned as previously described.

Ranger Wheel Service Equipment is warranted for one year
on all operating components to be free of defects in material and workmanship. Ranger Products shall repair
or replace at their option for the warranty period those parts returned to the factory freight prepaid which
prove upon inspection to be defective. Ranger Products will pay labor costs for the first 12 months only on
parts returned as previously described.

Ranger Shop Equipment is warranted for one year
to be free of defects in material and workmanship. Ranger Products shall repair or replace at their option for
the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be
defective. Ranger Products will pay labor costs for the first 12 months only on parts returned as previously
described.


Ranger Tool Storage and Benches are warranted for one year
to be free of defects in material and workmanship. Ranger Products shall repair or replace at their option for
the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be
defective. Ranger Products will pay labor costs for the first 12 months only on parts returned as previously
described.

These warranties do not extend to...

defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of
required maintenance;
•damages resulting from purchaser’s neglect or failure to operate products in accordance with instructions
provided in the owner’s manual(s) and/or other accompanying instructions supplied;
•normal wear items or service normally required to maintain the product in a safe operating condition;
•any component damaged in shipment;
•other items not listed but may be considered general wear parts;
•damage caused by rain, excessive humidity, corrosive environments or other contaminants.
THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING
WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL
LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR
MALFUNCTION OF A BENDPAK INC PRODUCT OR THE BREACH OR DELAY IN
PERFORMANCE OF THE WARRANTY.
This warranty is exclusive and in lieu of all other warranties expressed or implied. BendPak makes no warranty
on components and/or accessories furnished to BendPak by third parties. These are warranted only to the extent
of the original manufacturers warranty to BendPak. Other items not listed but may be considered general wear
parts. BendPak reserves the right to make design changes or add improvements to its product line without
incurring any obligation to make such changes on product sold previously. Warranty adjustments within the
above stated policies are based on the model and serial number of the equipment. This data must be furnished
with all warranty claims.