Authorized Dealer

The design of this motorcycle and ATV lift platform is legendary. Dependable pneumatic design provides years of trouble-free performance.

If you build, re-build, repair, service, maintain or store motorcycles and you still don’t have a Ranger motorcycle lift, you're robbing yourself of a truly awesome do-it-yourself experience. Ranger motorcycle / ATV lifts are known as some of the finest in the industry for quality, features, safety and longevity.

Take the Ranger RML-600XL Motorcycle / ATV Lift. This 1,000-lb. capacity power-house brings convenience and ease to any motorcycle or ATV job. Constructed from rugged 12-gauge steel with extra-wide drive-up ramps and dual-screw front wheel vise, the RML-600XL Motorcycle Lift is the reliable heavy-lifter that brings the joy back to motorcycle / ATV maintenance. Every Ranger RML-600XL Motorcycle Lift comes fully equipped with a generous 84” by 24” work table that will easily hold most bikes. But on the off chance that isn’t quite enough room, the 12” side extensions and the 13” front table extensions give you a massive 97” by 48” area to work and play in.

Bottom line: the design of this motorcycle and ATV lift platform is legendary. A retracting wheel deck provides the incredible free-hanging wheel accessibility of a two-post car lift while seven fail-safe locks keep the table securely in place under load. Top that off with an incredibly durable powder-coat finish and one of the most dependable pneumatic designs in existence and you're virtually guaranteed years and years of trouble free-performance from your new RML-600XL Motorcycle Lift from Ranger.

Need an extra boost? Check out the RML-1100 Motorcycle / ATV Jack. Or if you are looking for a more robust feature-set and the ability to lift an additional 650 lbs., consider the RML-750HD.

• Motorcycle lift constructed out of 12-gauge steel
• 10" bolt-on side extensions - standard
• 19" front table extension - standard
• 10-sec lifting vise
• Pneumatic lifting cylinder
• Durable powder-coat finish
• Adjustable front wheel vise
• Drop-away rear wheel deck
• 10" bolt-on side extensions
• Easy ramp(s) removal
• Hold-down rings

---

• Lifting capacity: 1,000 lbs. / 455 kg
• Lowered height: 7" / 178 mm
• Raised height: 31-1/2" / 800 mm
• Table length: 79" / 2007 mm
• Table length with extension: 98" / 2489 mm
• Table width: 24" / 610 mm
• Table width with wide extensions: 44" / 1118 mm
• Lifting time: 10 seconds
• Shipping weight: 538 lbs. / 244 kg
• Shipping dimensions: 30" x 85" x 11" / 762 mm x 2159 mm x 279 mm

PRODUCT WARRANTY

Ranger Spray Wash Cabinets are warranted for five years
on cabinet enclosure; one years on all operating components to the original purchaser, to be free of defects in
material and workmanship. Ranger Products shall repair or replace at their option for this period those parts
returned to the factory freight prepaid which prove upon inspection to be defective. Ranger Products will pay
labor costs for the first 12 months only on parts returned as previously described.

Ranger Wheel Service Equipment is warranted for one year
on all operating components to be free of defects in material and workmanship. Ranger Products shall repair
or replace at their option for the warranty period those parts returned to the factory freight prepaid which
prove upon inspection to be defective. Ranger Products will pay labor costs for the first 12 months only on
parts returned as previously described.

Ranger Shop Equipment is warranted for one year
to be free of defects in material and workmanship. Ranger Products shall repair or replace at their option for
the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be
defective. Ranger Products will pay labor costs for the first 12 months only on parts returned as previously
described.


Ranger Tool Storage and Benches are warranted for one year
to be free of defects in material and workmanship. Ranger Products shall repair or replace at their option for
the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be
defective. Ranger Products will pay labor costs for the first 12 months only on parts returned as previously
described.

These warranties do not extend to...

defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of
required maintenance;
•damages resulting from purchaser’s neglect or failure to operate products in accordance with instructions
provided in the owner’s manual(s) and/or other accompanying instructions supplied;
•normal wear items or service normally required to maintain the product in a safe operating condition;
•any component damaged in shipment;
•other items not listed but may be considered general wear parts;
•damage caused by rain, excessive humidity, corrosive environments or other contaminants.
THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING
WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL
LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR
MALFUNCTION OF A BENDPAK INC PRODUCT OR THE BREACH OR DELAY IN
PERFORMANCE OF THE WARRANTY.
This warranty is exclusive and in lieu of all other warranties expressed or implied. BendPak makes no warranty
on components and/or accessories furnished to BendPak by third parties. These are warranted only to the extent
of the original manufacturers warranty to BendPak. Other items not listed but may be considered general wear
parts. BendPak reserves the right to make design changes or add improvements to its product line without
incurring any obligation to make such changes on product sold previously. Warranty adjustments within the
above stated policies are based on the model and serial number of the equipment. This data must be furnished
with all warranty claims.