Authorized Dealer

XPR-12FD Floorplan

XPR-SERIES – EXTRA POWER / EXTREME PERFORMANCE
This open-top two-post lift is a rugged 12,000-pound capacity floor plate lift that features a “Dual-Synchro” equalization system and user-friendly controls. These advanced, state-of-the-art models feature dual, direct-drive low-pressure cylinders that minimize leakage and reduce the workload placed on the entire hydraulic system, an exclusive BendPak design feature saving you maintenance costs throughout the life of the lift. Sixteen individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversize 5” cable sheaves are an exclusive feature found only on BendPak XP-Series lifts. This boosts performance still further and vastly increases the life expectancy of the lift, a lift most likely to be the last one you’ll ever have to purchase. This 12,000-pound capacity XP-Series lift is also available with this specialty arm configuration to increase productivity.

• Triple-Telescoping Arms - increases overall arm positioning to precisely lift variety of different wheel base vehicles that have unibody construction and/or provided pick-up points on the vehicle. Order for the font arms only or all four. Contact your BendPak sales representative fro details.

FEATURES...

• Open-Top Convenience – This open-top model provides unobstructed space, floor-to-ceiling for lifting specialty vehicles like high cube delivery and work vans.


• Wide or Narrow Selection – Wide or narrow designs are available allowing you to maximize use of your floor space.


• Maintenance-Free Load Bearings - Rather than using roller bearings that need to be constantly lubricated, every XP-Series lift carriage uses futuristic UHMW ultra-high molecular weight polyethylene load bearings that never need lubrication and last virtually the life of the lift.


• Single-Piece Columns - We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.


• Dual Direct-Drive Technology - By utilizing two low-pressure “Direct-Drive” cylinders, we’ve eliminated the need for lifting chains or screw mechanisms most commonly found on other lift designs. This “Direct-Drive” technology offers better reliability, smoother operation and less maintenance. Low-pressure means less of a workload is placed on the entire hydraulic system.


• Single-Point Safety Release - The single point safety release and dead-man style operation controls makes every one of our XP-Series lifts easy to operate and safe to use.


• On-The-Level - Our “Dual-Synchro” equalization system maintains equal lifting and provides operators with a stable, level-vehicle working condition.


• Industrial-Grade Hydraulic Cylinders – Integrated into every XP-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground & polished C-1045/50 micro-alloy steel and plated to a minimum of .001½ diametrically, to ensure superior cylinder operation and life. Specially designed, high durometer, mechanically loaded rod seals virtually eliminate rod seal leakage and a specially formulated abrasion resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from high yield-strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures straight, smooth and long duty life cylinders. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.


• Lowered Arm Tube Supports – To minimize the chance of damaging vehicles with low hanging vehicle doors, we completely redesigned our arm tube supports to allow for better clearance.


• Automatic Arm Restraints – Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear type arm restraints automatically disengage to provide easy positioning of the lift arms.


• Taller Lift Carriages – Take a close look at our lift carriages (the lifting assembly that the arms are attached to) then take a look at the competition. You’ll notice our 53” tall carriages are considerably taller than most which minimizes the stress placed on the load bearings and columns.


• High-Speed Hydraulics - Free-flow, high-pressure 3/8” hydraulic lines and a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for increased productivity.


• Durable Powder Coat Finish – All XP-Series lifts feature a durable powder coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected then sandblasted. After, the parts are washed in our five-stage phosphate tanks that can accommodate parts up to 25’ long. Once cleaned, they’re immediately dried, to avoid rust production then outgassed. Outgassing is a process we take pride in which pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely cause chips in the powder. After the parts are washed and outgassed, any surfaces and/or threaded holes that need to be masked or plugged are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints then hung on an electrostatically grounded conveyor line. The powder is then applied using an electrostatic spray gun. The powder “sticks” to the parts similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400 degrees for 15 for 45 minutes.


• Free Truck and Van Adapters – Others charge extra for these necessary adapters but they’re standard with every XP-Series lift. Ideal for trucks and vans with running boards or auxiliary fuel tanks.


• Detailed Safety Instruction – Included with every lift are detailed installation and maintenance instructions, graphic safety and maintenance decals, and a vehicle lifting point guide and safety instruction placard that helps train personnel on proper safety and maintenance guidelines.

Shipping Details

It is the buyer's responsibility to unload the freight at their location. BendPak will take no responsibility for additional charges of any kind that may incur related to, or involved with, the renting or acquisition of equipment of any kind necessary to unload items off of a delivering carrier's truck. Contact your BendPak dealer for shipping details.

XP-12FD
Lifting Capacity	12,000 lbs. / 5443 kg.
Height Overall	145" / 3683 mm.
Width Overall (Outside of Base Plate)	155" / 3937 mm.
Width (Outside of Columns)	146" / 3708 mm.
Cover Height	2" / 51 mm.
Inside Columns	118" / 2997 mm.
Reach (Front Arm Min.)	33" / 787 mm.
Reach (Front Arm Max.)	61" / 1594 mm.
Reach (Rear Arm Min.)	33" / 787 mm.
Reach (Rear Arm Max.)	61" / 1594 mm.
Min. Pad Height	5" / 127 mm.
Rise	72" / 1829 mm.
Max Lift Height (Pad Only)	77" / 1956 mm.
Max Lift Height (6" Adapter)	83" / 2108 mm.
Drive-Thru Clearance	106" / 2692 mm.
Motor (**)	220 VAC / 60hz. 1ph.

** Special Voltages Available Upon Request.
The design, material and specifications are subject to change without notice.

Shipping Information

• Dimensions - 151"X 29" X 50" / 3835 mm. x 737 mm. x 1270 mm.
• Shipping Weight - 2611 lbs. / 1184 kg.