Electronic 3-D Measuring And 4 Wheel Alignment System

Cabinet and Computer

The cabinet can be Located anywhere convenient, as it doesn’t need to be close to the actual work area as the Measuring tower has it own “PDS” (personal display system).

Measuring towers

There is a measuring tower on each side of the vehicle. Each measuring tower has its own handheld and measuring arm that can be extended or retracted.

Rails

A measuring rail is mounted on each side of the rack for the measuring towers to roll on.

Wheel alignment

Wheel alignment is very easy to do . . . simply press the alignment button on the handheld and follow the instructions on the display screen.

Reports

Reports can be done before, during and after the repairs along with before and after wheel alignment.

Measuring toe angle

Measuring toe is done by measuring the rear of the wheel then the front of the wheel…

Measuring camber angle

Measuring camber angle is done by measuring the bottom of the wheel, then the Top of the wheel.

Measuring caster angle…

Caster angle is done by turning the front wheel inward 10 degrees and measuring the camber angle. Then turn the wheel outward 10 degrees and measure the camber angle. The computer will do the calculating and display the caster angle.