Bongo International
Merchant Services
 Visit Us
 On Twitter






Join our mailing list!

  Home > Alignment Lifts >

  Atlas VGAL-12S 12k alignment lift built in turntables with 2 rolling jacks package
  Atlas VGAL-12S 12k alignment lift built in turntables with 2 rolling jacks package
 
Financing Available-Get Instant Online Approval Now



List Price: $7,495.00
Our Price: $5,495.00
You Save $2,000.00


Product Code: VGAL-12S
Qty:


Description Warranty
 
escription:

The Atlas Vanguard Series of alignment lifts are built to the same exacting standards of all Atlas Lifts, but offer many exclusive features not found on many competitor’s lifts.

Features:
The Atlas VGAL-12S (Atlas Vanguard Alignment System...12,000 LB. capacity alignment lift with (2) 6,000 LB rolling jacks) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas VGAL-12S is strenuously tested to ensure that this alignment lift system will perform flawlessly at its rated capacities.  The Atlas VGAL-12 has been manufactured to the same exacting specifications for many years. .

The Atlas VGAL-12S uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.

The Atlas VGAL-12S incorporates a lock ladder system in each column and the all four column locks are simultaneously air activated from the power unit column. The runways are bolted to the cross tubes and can be adjusted if needed.

One pair (2) of turntables and built-in slip plates are standard with the 12,000 LB. four post lift.
The alignment turntables can be adjusted to three different positions.

The Atlas Vanguard Alignment Systems comes with two (2) 6,000 LB. air/hydraulic rolling jacks as standard equipment.

Features:
  • (2) 6,000 lb. capacity rolling jacks
  • Diamond Plate Runway Surface
  • Air operated single point lock release
  • Alignment Slip Plates and Turntables
  • Mounting Hardware Included
  • 5 Year Structural Warranty

Atlas VGAL-12S Complete Alignment System
Capacity 12,000 LB.
Lifting Height 70 1/2" (5' 10 1/2")
Overall Width of Columns (Without Motor) 126” (10' 6")
Overall Width of Columns (With Motor) 138” (11' 6")
Overall Length with Approach Ramps 234” (19' 6")
Overall Length without Approach Ramps 205” (17' 1")
4-Wheel Alignment Wheelbase

Maximum 155 in.
Minimum  100 in.
2-Wheel Alignment Wheelbase Maximum 164 in.
Length Between Columns 186” (15' 6")
Runway Length 202" (16' 10")
Runway Width 19 3/4" (1' 7 3/2")
Thickness of Runway 6 1/4”
Width Between Runways 43 1/2" (3' 7 1/2")
Width Between Runway Rails 39 1/2" (3' 3 1/2")
Outside Runway to Outside Runway 83 1/4” (6' 11 1/4")
Clearance Under Runways 63 ” (5' 3")
Column Dimension 5 1/2" x 7"
Base of Column 10 1/4” x 11 3/4”
Clearance Between columns 114 1/2” (9' 6 1/2")
Height of Columns 85 1/2” (7' 1 1/2")
Outside Column to Outside Motor 139” (11' 7")
Maximum Wheel Base 178" (14' 10")
Drive Thru 101 1/2” (8' 5 1/2")
Cable Diameter 1/2"
Motor 2 HP, 220 Volt, Single phase
Total Shipping Weight 4,195LB.


Atlas VGRJ-6
Maximum Width 60 1/2"
Minimum Width 32 3/4"
First Locking Position 8"
Second Locking Position 12 1/2"
Maximum Lifting Height 16 3/4"
Small Adapter 1/2"
Large Adapter 2 1/2"
Maximum Capacity 6,000 LB.
 

Other Products You Might Be Interested In:
Atlas 12ASL 12,000 lbs Alignment Scissor Lift Atlas 12AWFSL 12,000 lbs Alignment Scissor Lift BendPak HDO-14LSX 14,000 Lb. Cap / Open-Front Alig Atlas Pro 14000 lbs, Two RJ-70s, & Alignment Kit
Our Price: $7,495.00
Call For Availability!
888-902-0999
Add
Our Price: $8,995.00
Call For Availability!
888-902-0999
Add
Our Price: $7,085.00
Add
Our Price: $6,700.00
Add
Atlas 12ASL 12,000 lbs Alignment Scissor Lift Atlas 12AWFSL 12,000 lbs Alignment Scissor Lift BendPak HDO-14LSX 14,000 Lb. Cap / Open-Front Align. / Extended Atlas Pro 14000 lbs, Two RJ-70s, & Alignment Kit
BendPak XR-12AE Scissors Alignment, 12,000 Lbs. Ca BendPak HD-14LSX 14K Cap. Alignment Rack Plus 2 RJ Atlas Pro OF14K Open Front Alignment Lift BendPak HD-14LSXE 14,000 Lb. Cap. Alignment / Limo
Our Price: $10,940.00
Add
Our Price: $7,490.00
Add
Our Price: $6,995.00
Add
Our Price: $6,165.00
Add
BendPak XR-12AE Scissors Alignment, 12,000 Lbs. Capacity BendPak HD-14LSX 14K Cap. Alignment Rack Plus 2 RJ-7 Rolling Jacks Atlas Pro OF14K Open Front Alignment Lift BendPak HD-14LSXE 14,000 Lb. Cap. Alignment / Limo Style


 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Alignment Lifts
Alignment Lift Combos


Beginnners Garage Starter Package 14 items ( i ) $14,314.09
KD Tools KDT81317 ( i ) $617.53
Atlas Pro 14000 lbs, Two RJ-70s, & Alignment Kit $6,700.00
Armstrong ARM68-524 ( i ) $44.31
OTC OTC3365 ( i ) $109.08
SG Tool Aid SGT21000 ( i ) $4.56
Chicago Pneumatic CPT721 ( i ) $159.08
Sunex SUN7702 ( i ) $122.72
Astro Pneumatic AST7865 ( i ) $64.76