Bongo International
Merchant Services
 Visit Us
 On Twitter






Join our mailing list!

  Home > Alignment Lifts >

  Atlas Pro 14000 lbs, Two RJ-70s, & Alignment Kit
  Atlas Pro 14000 lbs, Two RJ-70s, & Alignment Kit
 
Financing Available-Get Instant Online Approval Now



List Price: $9,000.00
Our Price: $6,700.00
You Save $2,300.00


Product Code: TPPRO-14/TPRJ-70/TPALI-KIT
Qty:


Description Technical Specs Warranty
 
Direct Lift Pro 14K:
The ATLAS 14,000 LB. four post commercial grade lift is built for years of dependable service for the busiest of automotive shops. This heavy duty four post lift utilizes top quality aircraft cable actuated by an oversized hydraulic cylinder (located underneath the runway) to provide the smoothest and safest method of lifting both small cars and large trucks. You can trust the ATLAS name for many years of dependable service.

The complete ATLAS Pro 14K weighs just over 3,000 LB. and is one of the best built 4 post lifts sold in the USA. Please compare the steel thickness and the quality of construction to any other four post lift. Click here to get to the photo gallery with specifications.

Hydraulic Cable Method vs.
The Chain Lifting Method:
Certain competitors offer a four post lift with the “old-style” chain lifting method. The chain lifting method has many disadvantages when compared to the hydraulic cable method found on the ATLAS Pro 14K four post lift.

The exposed hydraulic cylinder found on the chain style four post lifts is located between one of the front columns and the rear column. Certain competitors show a truck lifted on their “old style” chain lift. The truck is positioned so that the customer cannot see the hydraulic cylinder located between the columns. This hydraulic cylinder is responsible for many “door dings”. The cylinder (whether located on the driver’s side or the passenger’s side) makes opening the vehicle doors very difficult.

One of the more important safety features of the cable four post lift compared to the chain style is the use of the rolling jacks.

Air Operated Double Lock:
The AIR OPERATED DOUBLE LOCK designed for the ATLAS Pro 14K offers many more safety features than the locking system on other four post lifts.

Wide Fixed Runways:
The ATLAS Pro 14K has very wide FIXED runways that will accommodate everything from a FORD F550 to a TRIUMPH TR 6. These FIXED runways offer a solid lifting platform for the RJ 70 rolling jacks that roll down the center of the lift. When the rolling jack is used to lift a vehicle “off” of the four post lift’s runways, there is an extreme downward force applied to the inside of both runways. The “old-style” chain 4-post lifts normally have one runway that is “moveable”. This “moveable” runway (when pressured with the downward force of a rolling jack) may easily “kick out” and allow the jack to become separated from the inside of the runway. If you own an old style chain four post lift, we would recommend that you “bolt down” the “moveable” runway to avoid an accident. The old style chain lifts have “moveable” runways because the width of their runways is narrower than the runways on an ATLAS Pro 14K four post lift.

Optional Accessories:
When you add the ATLAS Wheel Alignment Kit to the ATLAS Pro 14K four post lift, you can perform both two wheel alignment and four wheel alignment on most of the vehicles found in the USA.

The RJ 70 (7,000 LB rolling jacks) will allow the operator to perform a variety of wheel services while the vehicle is still on the ATLAS Pro 14K four post lift. The RJ 70 rolling jacks are very popular accessories for those garages performing two wheel alignment or four wheel alignment.

"Lock Ladder" Column Design System:
The Atlas Pro 14K has the same “lock ladder” column design system. The columns on our 8,000 LB., 9,000 LB., and 14,000 LB. four post lifts incorporate the “lock ladder” system which allows the customer to level the lift runways (both front to back and side to side), on floors that are not quite level. The “lock ladder” column system is the same column system found on professional grade lifts found in car dealerships and automotive service centers.

Double Lock System:
The Atlas Pro 14K incorporates the unique DOUBLE LOCK SYSTEM safety system into each of its four oversized columns. The DOUBLE LOCK SYSTEM safety system is designed to ensure that if a lifting cable becomes slack (for any reason), the secondary locking mechanism automatically engages. This DOUBLE LOCK safety system is found only on other four post above ground lifts costing hundreds of dollars more than the Atlas Pro 14K.

Flow Restrictor:
Atlas is proud to announce that many of our two post and four post lifts manufactured in our off shore factory (after 08-01-07) have flow restrictor valves installed in the hydraulic system. Some lifts do not require a flow restrictor.

Installation:
The ATLAS Pro 14K above ground lift should be installed on a concrete floor. This concrete floor should have a minimum of four (4) inches of concrete with 3000 PSI strength.

Most of our above ground lift customers install their own car lifts. The average time to install the ATLAS Pro 14K car lift is six hours.

We provide detailed installation instructions with all our two post above ground lifts and our four post above ground lifts.

Safety Labels:
In a concerted effort to improve customer awareness as to the correct operation of our two post and four post above ground lifts. The Dover Corporation and RLC are affixing the ANSI (ALI/101S) safety labels to our Atlas and Direct above ground vehicle lifts (after 08-01-07). These ANSI (ALI/101S) safety labels help to alert the operator as to certain potential dangers that may exist in the normal operation of the lift.

Parts:
Atlas Equipment stocks a complete inventory of lift parts for all the lifts we sell. Lift parts and technical support personnel can be found at all three of our locations.

RLC (the owner of Direct Lifts) maintains a fully stocked parts warehouse in Madison, IN.

Certain competitors do not stock the lifts they advertise and do not stock any of the lift parts or accessories. Lifting a car is serious business.


Atlas RJ-70:
The Atlas RJ-70 is a heavy duty rolling jack designed to lift and support 7,000 LB. The commercial grade RJ-70 rolling jack is used to raise the front or rear portion of a vehicle allowing the operator of a four post above ground lift to perform wheel and brake service. Most commercial shops buy two of these hydraulic rolling jacks, so that the entire vehicle can be supported in the air at the same time.

The Atlas RJ-70 has telescoping arms that can be extended over the runways of the four post lift. The lift pads at the end of these arms can be positioned under the LIFTING POINTS that are located over the runways of the four post lift.

Unique Roller System:
The RJ-70 rolling bridge is equipped with expandable supports which adjust to fit many different brands of four post above ground lifts. These supports have a unique roller system that allows the rolling hydraulic jack to glide easily under the entire length of the vehicle. The large nylon rollers and heavy steel wheels allow the rolling jack to be positioned under the correct lifting points in a matter of seconds.

Included Truck Adapters:
The Atlas RJ-70 comes standard with a set of peg style truck adapters which increases the lifting height of the lift pads. These truck adapters will allow the RJ-70 rolling hydraulic jack to raise most pick up and larger trucks that will sit higher than the average passenger car.

Air/Hydraulic Pump Operated:
The RJ-70 comes equipped with a commercial grade air/hydraulic pump. The air/hydraulic pump would require a supply of compressed air (air compressor) to work properly.

Two Solid Locking Positions:
The Atlas RJ-70 rolling hydraulic jack features two solid locking positions that are used when the vehicle is to be suspended above the runways. When the locking positions of the RJ-70 are engaged, the hydraulic pressure from the lifting cylinder of the jack is eliminated. (These locks act much like a pair of jack stands after you lift a vehicle off the ground with a service jack).

Atlas Alignment Kit:
The Atlas alignment kit is the perfect addition to the Atlas 14K if you are considering performing two wheel or four wheel alignments in your shop. The Atlas alignment kit can also be used on a variety of other four post above ground lifts.

The complete alignment kit consists of a set of front turn tables with the necessary wheel stops and approach ramps. Also included is the set of heavy duty ball bearing slip plates with the necessary set of on/off approach ramps. The front turn table set and the rear slip plate kit can be permanently attached (bolted) to your four post above ground lift. Alternatively, the complete Atlas alignment kit may also be temporarily installed (not bolted) on your four post lift. The Atlas alignment kit may also be used on any level surface (i.e. concrete floor) to facilitate the use of your four wheel or two wheel computer alignment system.

The Atlas alignment kit is highly adjustable and will accommodate a variety of vehicles with different length wheel bases.

Many permanent alignment kits found on four post alignment lifts are recessed into the runways of the lift. It is very difficult to prevent dirt, chemicals, salt, and other foreign material from becoming embedded in the rolling or sliding mechanisms of the turn tables or the slip plates. The Atlas alignment kit is positioned above the runways to allow easy access for service and cleaning. Even if you permanently mount the Atlas alignment kit, it can still be removed periodically (simply remove the bolts) to allow a thorough cleaning and servicing of all moving parts.

Many customers do not want to dedicate one of their four post lifts as a permanent four post alignment lift. The versatile Atlas alignment kit can be added or removed as needed and is able to turn almost any level four post lift in the shop into an alignment lift.

Atlas Pro 14K

  • Commercial grade
  • Air operated single point lock release
  • Atlas Power Coat powder coat finish
  • 14,000 LB. capacity
  • 5 Year Structural Warranty, 2 Year Power Unit
    		•


    Atlas RJ -70

    • Air/Hydraulic
    • 7,000 LB. capacity
    • Heavy duty / commercial grade
    • Scissor mechanism allows for level lifting
    • Compact size with a low profile
    • Adapters included
    • Safety lock positions
    • Smooth rolling action
    • Adapter storage
    • Atlas Power Coat

    Atlas Alignment Kit

    • Compatible With The Atlas Pro 14K and the Direct Lift Pro Park 9 Plus
    • 2 Wheel Stops
    • 2 Rear Slip Plates
    • 2 Turn Tables
    • 6 Ramps



     

    Other Products You Might Be Interested In:
    BendPak HD-14LSXE 14,000 Lb. Cap. Alignment / Limo BendPak HD-14LSX 14,000 Lb. Cap. Alignment / Exten BendPak HD-12LSXE Medium-Duty, Alignment, Ext., 12 BendPak HDO-14LSX 14,000 Lb. Cap / Open-Front Alig
    Our Price: $6,165.00
    Add
    Our Price: $5,635.00
    Add
    Our Price: $5,085.00
    Add
    Our Price: $7,085.00
    Add
    BendPak HD-14LSXE 14,000 Lb. Cap. Alignment / Limo Style BendPak HD-14LSX 14,000 Lb. Cap. Alignment / Extended BendPak HD-12LSXE Medium-Duty, Alignment, Ext., 12,000 Lbs. BendPak HDO-14LSX 14,000 Lb. Cap / Open-Front Align. / Extended
    SL-12K-A 12,000 lb. capacity scissors alignment li BendPak XR-12AE Scissors Alignment, 12,000 Lbs. Ca BendPak HD-14LS 14,000 Lb. 14,000 Lb. Capacity / A BendPak HD-14LSX 14K Cap. Alignment Rack Plus 2 RJ
    Our Price: $5,900.00
    Add
    Our Price: $10,940.00
    Add
    Our Price: $4,360.00
    Add
    Our Price: $7,490.00
    Add
    SL-12K-A 12,000 lb. capacity scissors alignment lift BendPak XR-12AE Scissors Alignment, 12,000 Lbs. Capacity BendPak HD-14LS 14,000 Lb. 14,000 Lb. Capacity / Alignment BendPak HD-14LSX 14K Cap. Alignment Rack Plus 2 RJ-7 Rolling Jacks


     Share your knowledge of this product with other customers... Be the first to write a review.



    Browse for more products in the same category as this item:

    Alignment Lifts
    Alignment Lift Combos


    Armstrong ARM68-524 ( i ) $44.31
    OTC OTC3365 ( i ) $109.08
    SG Tool Aid SGT21000 ( i ) $4.56
    Chicago Pneumatic CPT721 ( i ) $159.08
    Sunex SUN7702 ( i ) $122.72
    Astro Pneumatic AST7865 ( i ) $64.76
    KD Tools KDT3387 ( i ) $57.80
    Lisle LIS45750 ( i ) $65.88
    Armstrong ARM14-164 ( i ) $66.43