Atlas HI-RISE 1500 Motorcycle/ATV Lift

Description:
The Atlas HI-RISE 1500 is one of our most popular motorcycle and ATV lifts.

This lift has a manufacturer’s rated lifting capacity of 1650 LB., but Atlas rates the lift @ 1500 LB. (because we always under rate our weight capacities)The Atlas HI-RISE 1500 motorcycle lift is powered by the Atlas HTTLA 5100 air/hydraulic power unit. This air/hydraulic power system has an extra large hydraulic fluid reservoir; thus assuring a smooth and steady lift travel to the highest locking position.  You must have an air compressor that produces a minimum of 100 PSI to effectively operate the Atlas HI-RISE 1500 lift.

Increased Lifting Height:
The Atlas HI-RISE 1500 has a maximum lifting height of 43 inches. This increased lifting height makes it easier to work on vehicles while the operator is standing.

Included Chopper Extension:
The included chopper extension increases the diamond plated center section of this motorcycle lift to 100 ¾ inches.

Drop Out Rear Section:
The Atlas HI-RISE 1500 includes a standard drop out rear section to allow for easy removal of the rear wheel assembly.

Portable:
The Atlas HI-RISE 1500 is portable.

Front Wheel Clamp and Approach Ramps:
The Atlas HI-RISE 1500 motorcycle/ATV lift comes with a heavy duty front wheel clamp and a set of adjustable approach ramps.

Warranty:
One year structural.

Features

• Weight capacity – 1,500 LB.
• Atlas Power Coat
• powder coat finish
• Includes removable drop out section
• Includes chopper extension
• Table length without approach ramp or chopper extension – 80”
• Removable approach ramp included
• Maximum lifting height - 43”
• Lowered height – 7 ½”
• Table width – 51" with side extensions
• Powered by the Atlas HTTLA 5100 air/hydraulic power unit
• Heavy Duty Construction
• Vise included

Atlas HI-RISE 1500 Specifications
Weight Capacity	1,500 lbs.
Overall length (w/ATV ramp only)*	124 ¾” (10’ 4 ¾”)
Overall length (w/motorcycle ramp)*	143 ½” (11’ 11 ½”)
Center Table length (w/o ramps)*	100 ¾” (8’ 4 ¾”)
Side Extension length (w/o ramps)	88 ¾” (7’ 4 ¾”)
Center Table width (w/ side extensions)	51” (4’ 3”)
Center Table width (w/o side extensions)	29 ½”
Rear Cut Out	17” wide x 20 ¾” long
Height fully raised	43” (3’ 7”)
Height lowered	7 ½”
6 Locking Positions	(23”, 27 ½”, 31 ¼”, 34 ¾”, 37 ½”, and 40”)
Air Requirements	90 - 100 PSI / 5 CFM Delivery
Gauge of Steel	11 Gauge (.11" / 2.8mm)
Shipping Weight	800 Lbs.
*These measurements are taken with the free Chopper Extension attached. The Chopper Extension is 20 ¾” long.