Description:
The Atlas 412 12,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas lifts offer many exclusive features not found on many other competitor’s lifts.

Most truck shipments will be delivered by a commercial freight carrier operating a tractor/trailer rig. The semi trailer will be enclosed. Most commercial carriers have smaller straight trucks and some have small flatbed trucks, but the majority of freight companies will not use these smaller trucks for your delivery. Atlas cannot guarantee the type of truck that will be used for delivery. You should assume that your product will be delivered on a tractor/trailer rig that uses a 53 foot enclosed trailer. This is a VERY LONG rig. It is the truck driver's responsibility to make sure that your product is brought to the back of the delivery truck. It is the customer's responsibility to unload the product from the truck.

Features:
The Atlas 412 (12,000 LB. capacity four post lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas 412 is tested to ensure that this lift system will perform flawlessly at its rated capacities. The Atlas 412 has been manufactured to the same exacting specifications for many years.

The Atlas 412 uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.

The Atlas 412 four post lift incorporates a lock ladder system in each column and all four column locks are simultaneously air activated from the power unit column. The runways are bolted to the cross tubes, but can be adjusted (moved in) if needed.

• Air operated single point lock release
• Mounting Hardware Included
• 5 Year Structural, 2 Year Power Unit and Cylinders Warranty
  

Atlas 412 Four Post Lift
Capacity	12,000 LB.
Lifting Height	75 ½" (6' 3 1/2")
Overall Width of Columns (Without Motor)	126” (10' 6")
Overall Width of Columns (With Motor)	135” (11' 3")
Overall Length with Approach Ramps	230” (19' 2")
Overall Length without Approach Ramps	200” (16' 8")
Length Between Columns	184 ¼” (15' 4 ¼")
Runway Length	186 ½" (15' 6 ½")
Runway Width	22" (1' 10")
Thickness of Runway	7”
Width Between Runways	44 ½" (3' 8 ½")
Width Between Runway Rails	42" (3' 6")
Outside Runway to Outside Runway	84 ¾” (7' ¾")
Clearance Under Runways	68 ¼” (5' 8 ¼")
Column Dimension	7" x 5"
Base of Column	10 1/8” x 9”
Clearance Between columns	112 ¼” (9' 4 ¼")
Height of Columns	82” (6' 10")
Maximum Wheel Base	185" (15' 5")
Drive Thru	98 ½” (8' 2 ½")
Cable Diameter	1/2"
Motor	2 HP, 220 Volt, Single phase
Shipping Weight	2,650LB.