Th new Atlas 12AWFSL 12,000 lb. alignment scissor lift. This lift has been in production for several years and hundreds of these lifts have been sold throughout the world except for the North America.
Our Asian partner developed this lift in a joint venture with one of the most prestigious Italian lift manufacturers. The combination of the Italian engineering and design coupled with the low cost of the Asian labor has resulted in an alignment lift that is equal to or better than similar big name lift brands costing two and three times as much money.
The Atlas alignment lift has a lifting height of over seven feet so that it may be floor mounted or recessed if the customer decides on a flush mount installation. The full frame under the scissor lift provides for maximum stability.
The turntables may be moved into three different positions, allowing the customer to perform both two wheels and four wheels alignment on the shortest and longest of vehicles.
The extra long 53” long approach ramps make it easy to load low riding vehicles. Once a vehicle is positioned on the Atlas alignment scissor lift, there are two optional jack systems that can lift the vehicle off of the runways to perform wheel service. The air powered hydraulic Atlas RJ-6 rolling jack has telescoping arms that extend over the runways to access lift points. These jacks have screw out extensions or optional stack on truck adapters.
The other scissor jack system is the wheels free option. This method is a perfect quick lift for a perimeter framed or unibody vehicle. The wheels free jack system is not designed to lift straight framed vehicles, because most straight framed vehicles have narrower lifting points than a unibody vehicle.
The wheels free system can be controlled from either the control panel or from a wired remote. This wired remote allows the customer to actuate the wheels free system from many different positions around the scissor lift.
The telescoping wheels free lift platform can be extended for longer wheels based vehicles. Standard heavy duty rubber supports are used to prevent damage to the lifting surfaces of the vehicle.
The Atlas 12AWFSL 12,000 alignment scissor lift has multiple automatic locking positions to ensure that the lift can be safely used at different heights. The air actuated lock system engages automatically as the lift moves up and is deactivated from the control panel when the lift is ready to be lowered.
The wheels free runway jack system has the same style air actuated lock system. When fully extended, the wheels free system elevates to over 17 inches above the runway.
The Atlas 12AWFSL 12,000 lb. alignment scissor lift is available with either a standard runway or with the built in wheels free system. Welded rails on the inside of the runways are standard on all lifts, allowing the customer the option of incorporating the Atlas RJ-6 rolling jack system on his Atlas alignment scissor lift.
Quality workmanship, ease of operation, straightforward installation instructions, a durable powder coat finish and the lowest prices in the Industry makes the Atlas 12AWFSL 12,000 alignment scissor lift the perfect choice for the demanding and discriminating shop owner.
Features
- Heavy Duty Construction and super-balanced lift for wheel alignment
- Can be surfaced mounted or flush mounted
- Very precise platform leveling accuracy
- Mechanical safety lock with air operated engagement and release
- Emergency manual pump for lowering
- Overload valve included
- Lowering speed control valve included
- Extra Long Slip Plates allow for aligning of wheelbases from 172" to 86"
Atlas 12AWFSL 12,000 LB Alignment Scissor Lift Specifications |
| Lifting Capacity |
12,000 LB |
| Lifting Height |
84 1/4" (7' 1/4") |
| “Wheels Free” in ramp jack system Height |
17" (1' 5") |
| Overall Width |
86 3/8" (7' 2 3/8") |
| Overall Length with Approach Ramps |
250" (20' 10") |
| Overall Length without Approach Ramps |
197" (16' 5") |
| Approach Ramp Length |
53" (4' 5") |
| 4-Wheel Alignment Wheelbase |
Max. 168 in.
Min. 90 in.
|
| 2-Wheel Alignment Wheelbase |
Max. 172 in.
Min. 86 in. |
| Runway Width |
23 3/4" (1' 11 3/4") |
| Lowered Height |
11 1/2" |
| Locking Positions |
19 |
| Adjustable Width Between Runways (installation) |
35"-38" |
| Motor |
220 Volt |
| Shipping Weight |
5000 lbs. |
